Options for Thin Home Theater Receivers

My friend Dan lives in New York and he mentioned the other day that he wouldn’t mind a more minimal home theater receiver since his apartment doesn't have all that much room to begin with:

I currently have an insanely complicated home theater setup that takes up half my closet, connected by a rat’s nest of cables that I dare not touch lest I inexplicably lose the left audio channel on my Blu-ray player. It’s ridiculous, it’s completely overkill for my needs, and did I mention it takes up half my closet? My tiny, Manhattan-sized closet?

[…]

My home theater receiver is huge. Massive. It’s 10” tall, 20” deep, weighs 800 lbs, and probably draws more power than our air conditioner. Despite its long list of capabilities, it has but two jobs that are of any use to me: 1) switch between my various components, and 2) make things loud.

[…]

And so, I find myself looking for a replacement. Something small. Something elegant. Something that does what I need, and nothing more. […]

As I rather enjoy home theater stuff, I thought I’d try to come up with a few options for him.

What I soon discovered is that there aren’t many products in this category. Granted, you’d have several options if all you had needed was 2-channel (stereo) amplification. (I suppose they’re catering to systems that one might place on a bookshelf or the like.) On the other hand, when catering to a home theater, a receiver needs a separate amplifier for each of (at least) five channels; those extra amplifiers alone take up more space. In addition, it seems that there isn’t much demand for “bookshelf” home theaters and so multi-channel receivers typically use amplifiers that are beefy enough to fill medium-to-large rooms. (And beefier amplifiers take up yet more room.)

Nonetheless, I did find a handful of options that I thought might work for Dan. I didn’t come across a single perfect product—for instance, some were small, but had a lot of buttons, while others were relatively larger but had few buttons— but I think there’re some promising options here.

I decided to use the Outlaw Audio 1050 in my bedroom (a 70 Wpc receiver) as a baseline for comparison. It’s served me well for many years, but more importantly for this discussion, its size and weight seemed to be fairly representative of an average receiver:

  • Width: 17 3/16"
  • Height: 6 1/8"
  • Depth: 14 5/16"
  • Weight: 36.3 lbs

Sherwood R-904N NetBoxx

  • Width: 17" (1% narrower than baseline)
  • Height: 2 7/8" (53% shorter)
  • Depth: 12" (16% shallower)
  • Weight: 10.3 lbs (72% lighter)
  • Power: 100 Wpc × 7 channels
  • Price: About $440

This receiver is clearly the leader in size (or lack thereof). While not the narrowest or the lightest of the bunch—those honors would fall to the Yamaha—this one is the shortest (height) and shallowest (depth). Unfortunately, though, this receiver has some design drawbacks that might be deal breakers for some:

The first complaint that I must mention is a styling issue related to the front display of the NetBoxx. The front of the unit is covered with very bright blue LEDs. During the day these LEDs are fairly innocuous; however placed in a dark room, they become extremely distracting. I don’t understand why Sherwood would put a dimmer option on the unit that only dims some of the LEDs. Because of this I would recommend placing the NetBoxx in a location out of sight, which is a shame as it’s otherwise an attractive unit. […]

Yamaha neoHD YMC-500

  • Width: 11 3/4" (32% narrower than baseline)
  • Height: 3 5/8" (41% shorter)
  • Depth: 12 3/8" (13% shallower)
  • Weight: 7.9 lbs (78% lighter)
  • Power: 35~50? Wpc × 5 channels (I had a hard time confirming the power output.)
  • Price: About $180

This is a pretty darn small receiver. It’s the narrowest (width) and lightest (weight) of the bunch, and even though the Sherwood beats it on height and depth, the Yamaha is only 3/4" taller and 3/8" deeper. This receiver also has the fewest front-panel buttons: 2 (volume knob & power button).

Oddly enough, I had some trouble confirming this receiver’s power output; the specifications I was able to find weren’t all that explicit in this regard, but the unit appears to either have 35 or 50 Wpc as best as I can figure.

If this type of minimalism were of interest, the YMC-500’s bigger brother, the YMC-700, might also be worth considering. Both models allow you to play music from your home network, but the YMC-700 (which goes for about $500) has built-in WiFi (rather than just an Ethernet port). Plus, Yamaha also offers an iPhone app that can control one’s YMC-700. (The app communicates over WiFi and so it works with the YMC-700 but not the YMC-500.)

Marantz NR1501

  • Width: 17 3/8" (1% wider than baseline)
  • Height: 4 3/16" (31% shorter)
  • Depth: 14 1/2" (1% deeper)
  • Weight: 19 lbs (48% lighter)
  • Power: 50 Wpc × 7 channels
  • Price: About $400

The Marantz may be the most traditional of the receivers here. While its dimensions might not be as low as the other receivers here, its height is only 9/16" taller than the next-shorest model (the Yamaha) and 1 5/6" taller than the shortest (the Sherwood). Even then, it’s still about 1/3 shorter than a standard receiver and about half the weight.

Even if the Marantz might not seem as impressive as the others when it comes to size, it does have a few things going for it. For one thing, its back panel includes 2 optical inputs (and 2 coax digital inputs). Granted, Dan mentioned only needing a single optical input (which the Sherwood and Yamaha have), although I can’t help but wonder if that second input might potentially come in handy if Dan were to ever get another device such as an X-Box or a TiVo.

Another potential advantage of the Marantz is its pedigree. Marantz is owned by D&M Holdings, a company that also owns Denon, McIntosh, and a few other brands. I’m not saying that Yamaha is a slouch—although I have my suspicions about Sherwood—but Marantz is a brand that’s known for its attention to detail and build quality. I would expect any of their equipment to last for many years.

Additional Thoughts

There may not be a clear winner here, but there may be a receiver that’s best for you depending on the features that you value most.

I would only consider the Sherwood if sheer size is your utmost concern. It’s not the lightest of the bunch, but it’s definitely the shortest. On the other hand, I’m a bit skeeved out by its build quality—if they’re already screwed up the blue LEDs across the front, how much else might be sub-par?

For most people, I think it comes down to the Yamaha and the Marantz. On one hand, the Yamaha is the cheaper of the two ($180 vs. $400), but on the other hand, the YMC-700 (which goes for $500) seems like a justifiable step-up considering that model’s WiFi streaming (née Ethernet) and iPhone app support. So, depending on which Yamaha model you’d be putting up against the Marantz, it could be a toss-up between those two brands on price.

What I think it comes down to is size & minimalism vs. capability & pedigree. The Yamaha is certainly the smaller overall and its front facia—with just two buttons—is also sparser. Still, the Marantz has a few more inputs (which may come in handy if you get more devices) and it also has a clear 50 Wpc × 7 channels. (The Yamaha’s specifications were somewhat unclear, but it appears to have either 35 or 50 Wpc. Even so, that’s across 5 channels rather than the Marantz’ 7.)

If I were in Dan’s shoes, I might lean toward the Marantz. All the same, the Yamaha would not be a bad choice either.

2 thoughts on “Options for Thin Home Theater Receivers

  1. Alex, It sounds like one of Dan’s concerns was not just the size of the receiver, but the complex rat’s nest of cables. Have you considered any of the blu-ray combo recievers? I don’t know of any specific models off the top of my head, but I have seen relatively small units that include a blu-ray player and 5.1 receiver in a single unit. This would eliminate several cables and simplify the connections.
    For a small apartment, you could even look at one of the “system in a box” receivers that include everything but the TV. The all-in-one systems usually include a single-unit blu-ray/dvd player and receiver, as well as speakers and cabling. The more expensive ones sometimes use wireless speakers. I personally don’t like wireless speakers due to audio quality issues, but for a small apartment where you can’t turn up the volume, they would be ideal.

  2. I have several clients that are in the market for just such a AVR to put into their small cabinets. Thanks for the write up it gives me a good place to start.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.